Stainless Steel Ultraviolet Accelerated Weathering Tester

• Customization: Available
• After-sales Service: One Year Free Warranty
• Power Supply: One Year Free Warranty
• Model NO.: TY-UV130
• Warranty: 1 Year
• Keyword1: UV Accelerated Weathering Tester
• Keyword2: Thermal Shock Test Chamber
• Keyword3: Hot and Cold Cycle Test Chamber
• Keyword4: High and Low Temperature Impact Box
• Transport Package: Wooden Case Packing, Air Freight, and Sea Freight
• Specification: 1100X600X400cm
• Trademark: Taiyuan Machinery (Dongguan) Co., Ltd
• Origin: Dongguan City, Guangdong Province, China
• Production Capacity: 50PCS/Month

Product Description

Product Description
TY-UV130 Stainless steel ultraviolet accelerated weathering tester
1.application of equipment:
The test equipment simulates the damage caused by solar ultraviolet light, and tests the weather resistance of the tested material by exposing it to light under controlled high temperature.It uses ultraviolet lamps to simulate the radiation of sunlight, and simulates dew and rain through condensation and water spray over a period of days or weeks,UV irradiation equipment can cause damage that would take months or even years to occur outdoors,These include fading, color change, tarnishing, powdering, cracking, cracking, wrinkling, foaming, embrittlement, strength reduction, oxidation and so on,Its test results can be used to select new materials, improve existing materials, or evaluate material formulation changes.
2.technical index:
1,Volume and dimension:

• 1.1.Dimensions of the working chamber:1100×600×400(cm)

• 1.2.carton size: depends on real goods

2,Irradiance control system :(optional)
2.1.Enable irradiation when using UVA-340 lamp tubes (UVA-340)
2.2.UVA-340 irradiance range: 0.45 ~ 2W/m2 adjustable (at peak 340nm)
2.3.Prolong lamp life
3,UV lamp parameters:
3.1.Lamp model: standard UVA-340(315 ~ 400nm) 8 lamps
3.2.Brand:  imported from the United States
3.3.The center distance of the lamp: 70mm
3.4.Test product and lamp center distance: 50±3mm
3.5.Irradiation intensity: output according to the set light intensity

• 4,temperature humidity index

4.1.Temperature range: +10 ~ 70ºC adjustable at normal temperature
4.2.Humidity range: ≥90%RH
4.3.Temperature fluctuation: ±2ºC
4.4.Temperature resolution: 0.1ºC
5,blackboardthermometer:
5.1.measuring range:45~70ºC
5.2.tolerance:±3ºC

• 6,Temperature control type:PID self-tuning temperature control mode

7,technical feature:
7.1.It provides comprehensive and detailed real-time monitoring and curve recording for important test parameters such as irradiance, temperature and time (the controller has the function of paperless recorder). It can also generate reports and print curves through thecomputer.
7.2.Irradiation/condensation/water spray test can be carried out alone, or any combination of irradiation/condensation/water spray test can be programmed.
7.3.Adopts 5.7 inch real color touch screen control system of South Korea Sanyuan level, which has good stability, monitoring, operation and maintainability.
7.4.It provides life reference for imported ultraviolet lamp tubes with expensive materials (lamp tubes are consumables with a life of about 1600 hours), which is convenient for users to confirm the replacement time of the lamp tubes and save the use cost.Through the irradiance measurement and control device (by adjusting the voltage), the irradiance can be measured and controlled, so that the irradiance will automatically stabilize at the set value, and greatly prolong the service life of the lamp tube.
7.5.Using automatic water supply and drainage design, and with high cost of high-power water mercury, to ensure the flow rate and uniformity of water spray.
7.6.Most of the main components are international brands, and a small part are domestic brands, which improves the safety and reliability of the products. (See the list of major accessories attached for details.)
7.7.The installation and wiring of the electrical part of the equipment shall be carried out according to the international electrician standard.
8,meet a criterion:
8.1.GB/T14552-2008 "National Standard of the People's Republic of China -- Plastics,coatings, rubber materials for machinery industry products -- Artificial climate accelerated test method" A, fluorescence ultraviolet/condensation test method.
8.2.GB/T16422.3-1997, GB/T16585-96 correlation analysis method
8.3.GB/T16585-1996 "national standard of the People's Republic of China -- vulcanized rubber artificial climate aging (fluorescence ultraviolet lamp) test method".
8.4.GB/T16422.3-1997 "Plastics Laboratory Light Source Exposure Test Method" and other corresponding standard provisions design and manufacturing standards.
8.5.In line with international test standards: ASTM D4329, ISO4892-3:1994, ISO 11507, IEC61646-2008, SAE J2020 and other current ultraviolet aging test standards.
8.6.GB/T14576-1997 "Textiles test method for composite color fastness to light and sweat"
8.7.Other kinds of standards are not listed in detail, if necessary, please confirm with our technical department.
3,Introducting the Function Blocks
1,Irradiation system (simulating sunlight):
2,Light source: 8 imported ultraviolet fluorescent lamps with rated power of 40W (American ATLAS), with UVA-340 light source
3,Irradiance control system:
3.1.The change of light intensity will affect the aging rate of materials, while the difference of spectrum may affect both the aging rate and the aging type of materials.Only by controlling the irradiance of the current system can accurate and repeatable test results be obtained.
3.2.The built-in voltage system is a precise closed-loop control system that automatically maintains the set light intensity through a feedback loop.The controller continuously monitors UV light intensity and adjusts the lamp output to compensate for changes in light intensity caused by aging of the lamp or any other element.The reproducibility and repeatability of the test results of the control system are better than that of artificial irradiance control, and can effectively prolong the life of the lamp tube.
3.3.In the UV cycle, irradiance outputs a signal through the controller, which adjusts the
intensity of a set of (two) lamps through a voltage and transmits the data to the controller.The controller compares the irradiance measurement to the set value, and then instructs the power system to adjust the lamp output to maintain the light intensity set value.
4,UV cycle temperature control:
4.1.The components of the UV circulation system include a blower, air heater, air distribution system, and blackboard temperature sensor.
4.2.Blower: installed in the lower box of the equipment air channel, in the whole UV cycle, the blower is continuous work.
4.3.Air heater: installed in the air duct above the blower, used to heat the air blown out by the blower when needed.
4.4.Air distribution system: the air blown by the blower enters the laboratory through the air pipe in the center of the water tray, and then fills the whole laboratory by the air guide.
5,Condensation system (simulated dew):
5.1.In essence, the QUV condensing system is that the evaporated water vapor is restricted in the experimental chamber by the sample of the experimental chamber. The air on the back of the sample makes the temperature of the sample water vapor lower, and this temperature difference makes the water vapor condensed on the sample.During the condensation cycle, the water is heated by the heating element under the water tray, and the water vapor fills the chamber, reaching an equilibrium at 100% humidity. The water vapor condenses continuously on the samples, while they are kept cool by the room air behind them.Steam is condensed on the sample and finally flows back to the water tray.
List of main parts

serial number	name	ASSAB
1	True color touch screen controller	KoreaTIMI880
2	quartz burnerUVAstandard configuration)	AmericaFLB UVA-340
3	a.c. contactor	ChinaChint Group
4	timer	JapanOmron OMRON
5	overtemperature protection	KoreaRAINBOW
6	solid-state relaySSR	ChinaMAGER
7	temperature sensor	TaiwanCAHO
8	RCD	ChinaChint Group
9	circulating fan	TaiwanSUNON
10	heater	TaiwanLONGXING
11	sprinkler system supply pump	Guangdong Lingxiao Mercury Industry Group

 

After-sales service commitment

1. The quality guarantee period is one year, starting from the date of formal delivery;
2. During the warranty period, in addition to the damage caused by natural disasters, abnormal power, improper use, improper maintenance and other factors, the company completely free of charge;
3. Free to provide users with the required use and maintenance consultation;
4. Timely to provide users with wearing parts, spare parts, to provide spare parts for life;
5. During the work of the test box, in case of the test system failure, our company should immediately give a reply after receiving the notice, and send the maintenance engineer to the site within 24 hours (depending on the status of the work assignment) to help the user with the equipment testing and maintenance to realize the normal operation of the equipment;
6.  Our company will regularly send maintenance engineers for users of free door-to-door maintenance, maintenance;
7. After the shelf life, for the user lifetime maintenance, but discretionary maintenance and material costs.

Company Profile:
TAIYUAN MACHINERY EQUIPMENT(DONGGUAN)CO.,LTD is the subsidiary of TAIYUAN GROUNP(CHINA)CO.,LTD.The TaiYuan machinery company is located in 'the world factory'Dongguan City, the the Pearl River Delta region of China, adjacent to Hong Kong and Macao.
We have over 30 years in producing Chemical, and aviation equipments;Simulated climate testing and Size measuring equipments;Automated production equipments;Food production equipments etc.,those are widely used for scosmetics, food,chemical  aviation,biology, pharmaceuticals etc.Especially our independently developed aviation solid propellant mixer and liquid metal, molten salt high-temperature magnetic transmission pump are hot selling and getting so good sales volume in USA, South America,North America, Europe,Rssia,Southeast market etc,
Our company has 6000m2 working shop,with lSO, CE European certification and Manufacture License forpressure machines.We have all kinds of technical personnel.resea